Infiltrator - Quick4 Plus Standard Chamber - Q4+STD

***Available in Indiana and parts of Ohio and Illinois. Please contact us if you are outside of this service area.***

Description

The Quick4 Plus Standard chamber offers maximum strength through its two center structural columns. This chamber can be installed in a 36" wide trench. Like the original line of Quick4 chambers, it offers advanced contouring capability with its Contour Swivel Connection, which permits turns up to 10°, right or left. It is also available in 4' lengths to provide optimal installation flexibility.

Infiltrator Quick4 Chambers — FAQs

How much do Infiltrator Quick4 chambers cost?

Quick4 Plus Standard Low Profile chambers run $31.93 per chamber on our site (please confirm current Standard, non LP pricing before publishing). A typical residential drainfield uses a chamber count sized to your design flow and soil conditions, so material cost varies by project. Even so, chamber based systems typically run well under stone and pipe once labor is factored in.

How much does a full Infiltrator septic system cost?

A complete chamber based system, tank, chambers, risers, and fittings, is priced per project since it depends on tank size, chamber count, and site conditions. Chambers eliminate gravel hauling and reduce labor time, which is where most of the savings versus conventional stone and pipe systems come from. Contact us for a quote sized to your permit.

What size is the Quick4 Plus Standard chamber?

Each Quick4 Plus Standard chamber measures 34" W x 53" L x 12" H with a 48" (4 foot) effective length. Chambers interlock and can be installed in curved or straight trench configurations with up to a 10 degree turn per joint, right or left.

How do you install Infiltrator Quick4 chambers?

Excavate trenches to your permit spec, level the bottom, snap chambers together end to end, install end caps, connect the inlet pipe, and backfill. No gravel required. Full installation instructions are published by Infiltrator, and your local health department dictates trench sizing and setbacks.

What's the difference between Quick4 Plus Standard and Low Profile chambers?

Standard chambers are 12" tall. Low Profile (LP) chambers are 8" tall for shallow installations with limited vertical separation to the water table or restrictive layer. Both share the same footprint. Shop the Infiltrator Quick4 Plus Standard Low Profile chamber if your design requires reduced height.

Manuals